News
Car code rolling code automatic door opener How to use Operation
Instructions for use：
rolling code auto door opener remote control detector scanner decoding device A315 self clone remote control key
rolling code auto door opener remote control detector scanner decoding device A315 self clone remote control key
Adjustable frequency Car key remote control Wireless Remote Key Code Scanner Detect, receive, copy car remote control signals, then command the car as freely as the car’s owner
Adjustable frequency Remote Control Code Scanner receives the signal sent by the Rolling Code anti-theft system, save and copy the master’s remote control signal The effective distance is 500 metres Save thirty remote control signals Decodability chip: PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014
Overview: This machine is in the boot receiving state, can automatically decode the received remote control signal within 100 meters, and automatically save it in the machine, through the buttons 1,2,3,4 keys with the same function as the original remote control.
First, switch machine:
Three steps are divided by the toggle switch behind the button (the leftmost is the shutdown, the middle is paused, the right is the receiver)
Automatically receive and save remote control signals are saved from 1-35 groups in sequence, and the corresponding reading key functions are queried.
Second, the key function:
1 (1234) Send key; consistent with the remote control, press 1 key to open the door, 2 key to lock the door, 3 key to find the car, 4 key trunk, etc.
2 (5 key) check code, find and receive the code stored in the machine, press the 5 key once to exit a group of codes, the order from high to low retreat, and press the 5 key to enter the machine setting. (Long press the 5 key Several additional functions are jumped out, interference, horn, scan 2262, scan 5326) When this interface is clicked to confirm by pressing the 6 keys, the desired function pointed by the arrow of the mouse button is determined by the 5 key, and the corresponding function can be entered.
3 Switch code format button; (6 button) Press once, change once, auto-red light - blue 1 - blue 2 cycle conversion. When the rolling code is transmitted, it is automatically adjusted, and then any key in the code (1234) is sent for transmission. When transmitting a fixed code, use (blue one) to use (blue 2) (red light) to transmit. (This function is controlled by the control party when the emission control is not responding).
Third, the password function:
For the owner to restrict all unauthorized use, the machine is set to ON at the factory and the password can be accessed only. The initial password is 123456. You can arbitrarily modify the required password, press and hold the 5 key for an additional interface and then press the 6 key arrow to point to the password and then press the 5 key to confirm, enter the original password 123456 will appear to open the password, then press the 6 key to enter the new password you want 2 times After entering the same new password twice, the password is successfully modified. Press any of the transmit keys to return. After booting, you need to access the password.
Fourth, access code: (Save important code)
The important code is user access and will be saved for a long time without being washed away. When the machine automatically saves 35 groups, the 36th group saves the first group, and the original first group is removed. First select this important group code, press the 5 key for a long time to enter the menu, press the 6 key to make the arrow point to the access code, press the 5 key to enter the power on password, and press the 6 key to enter the position of the selected code 1,2,3,4 , 6 key select 5 key to confirm, press the launch key to return. Important code can be stored in 4 groups. When you need to retrieve the important code, press and hold the 5 key, and then press the 6 key to point to the access code. Press the 5 key to confirm that there is a password to enter the code to see the code inside.
Six, additional features:
Interference: used to interfere with remote control failure.
Speaker: You can use 6 keys to select volume or mute.
Scanning 2262, scanning 5326 machines did not receive the situation for automatic pairing control.
Password: Access password is required after setting.
Access code: save important code
When the machine's power-on status indicator flashes, it indicates the receiving status. After it is received, it will light up for one second and the machine buzzer will drop a machine vibration, indicating that the remote controller has received the decoding success.
Look at the indicator on the charger while charging. The red light indicates charging, and the green light indicates full.
Concluding remarks: This machine is limited to legitimate use and violates national laws at your own risk.
