Car Code grabberinformation:

1. Tool code grabber usually consists of two parts: grabber and enhancer. The grabber receives and records the code signal from the remote control and then transmits it to the booster. The booster uses these coded signals to trick the car into thinking the remote is nearby, opening the doors and starting the engine.

2. Tool Code Grabber can capture code signals by placing the device near the remote control. This means that if the car owner leaves the remote control at home or in the office rather than next to the car, the Tool Code Grabber will not be able to capture the code signal.

3. Tool code grabber is usually used to copy the code signal of the remote control so that the car can be opened without the remote control. These devices can be purchased online, with prices ranging from a few thousand yuan to tens of thousands of yuan.

4. The tool code grabber can also be used to copy the signals of access control cards and RFID cards so that access control and RFID locks can be opened without cards

 

In summary, a tool code grabber is a device used to intercept and capture the rolling code signals transmitted between the car and the remote control. These devices are typically used for vehicle maintenance and testing, but must not violate laws and regulations.