1. Prepare the remote control that needs to be coded.

2. Prepare a code grabber.

 

Press the code button of the door opener (behind the motor), the code indicator of the door opener will turn on constantly, press the button in the hand, the red light on the remote control and the red light on the door opener will be on at the same time, press 2- 4 times (the number of different door openers is different), the two red lights are 2-4 times at the same time, which is the correct code. Note: After all the remote controllers have been coded, check the code indicator of the door opener. At this time, the light should be off. If the code indicator light is on, the door opener is in the coded state, and it may be equipped with other remote controllers to cause the automatic door to “automatically open the door” or “open the door to each other”. At this time, press the code key to make the code indicator light go out. . Then the door opener can be used normally. The garage door remote control is mainly expensive on the single-chip microcomputer, so the price of the garage door remote control mainly depends on the technology of the control chip.

 

 

As for how to configure the garage door remote control, you need to use the car remote copy machine. When the remote control is damaged, it can copy all kinds of remote controls, such as car anti-theft remote control, electric door remote control, garage door remote control, retractable door remote control and so on. The system consists of a digital anti-theft remote control copying host (equivalent to a keyed computer keying machine) and an uncoded remote control (equivalent to a key blank), which can be configured with all fixed code anti-theft remote controls and most computer-type anti-theft remote controls, and Not subject to the remote control brand. How to match the garage door remote control can be solved quickly by the car remote copy machine.

 

Finally, I want to remind everyone about the price of the garage door remote control. We recommend that you try not to choose a remote control that is too low in price. Of course, the higher the price, the better. Generally speaking, the price of the garage door remote control is about 3,000 yuan, and the price is relatively high. You can choose products at different prices according to your financial ability and needs. How to match the garage door remote control is actually a specific use function in the code of the garage door remote control. Only when the code is successful can the remote controller be paired.